Adhesives

Three Bond Anaerobic Adhesives

Three Bond 1324

Anaerobic Adhesive / Medium Strength

Product Three Bond 1324 is a one-component, anaerobic reactive adhesive sealant without solvents, specially developed for the assembly of medium-sized screws and threads from M8 to M36. It is applied in liquid form at room temperature to one of the surfaces to be joined. After the parts are assembled, a strong adhesive seal is formed in a very short time, which fully adapts to the surface structure of the mating surfaces. All micro-level roughness, such as machining grooves and scratches, as well as macro-level irregularities (waviness of the mating surface) are filled, ensuring absolute conformity. The high-resistant chemical properties and good cohesion simultaneously achieve high strength within the adhesive seal.

Features:

  • Extremely easy to dose and apply due to being one-component and solvent-free.
  • Anaerobic curing begins immediately after the assembly of mating parts due to air exclusion and metal contact (suitable for almost all metals).
  • Since solidification does not occur through heat, assembled parts can be easily separated during machine repairs.
  • Excellent chemical and thermal resistance, along with outstanding vibration and shock resistance due to its excellent mechanical properties.


Typical Properties:

  • Color: Red
  • Viscosity at 25°C: 600 mPa·s
  • Density at 25°C: 1.13 g/cm3
  • Optimal gap tolerance: 0.01 ~ 0.03 mm
  • Maximum gap tolerance: 0.3 mm
  • Functional curing time at 25°C: 2 hours
  • Full cure time at 25°C: 24 hours
  • Breakaway torque on iron (M10 x P1.5): 22 Nm
  • Prevailing torque on iron (M10 x P1.5): 30 Nm
  • Shear strength on iron (0.01 mm gap): 28 MPa
  • Shear strength on iron (0.05 mm gap): 21 MPa
  • Temperature range: -60°C to +150°C
  • Shelf life at 25°C: 12 months


Please refer to the TDS for the complete technical specifications.

This website uses cookies. Here you can choose which cookies you want to accept and change your selection at any time. If you click on 'Agree', you agree to the use of cookies.